Página inicial > Lista de Produto > Carga Eletrônica DC > Carga eletrônica de 1200V DC > Carga eletrônica DC programável de 1200V 4400W
  • Descrição do produto
Overview
Atributos do produto

ModeloEL1200VDC4400W

marcaApm.

Lugar De OrigemChina

Input Voltage0~1200V

Input Current0~160A

Input Power0~4400W

Voltage Readback Accuracy0.015%+0.015%F.S.

Current Readback Accuracy0.04%+0.06%F.S.

Power Readback Accuracy0.1%+0.1%F.S.

Height3U

Warranty2 years

InterfaceRS232/RS485/USB(Standard)

Capacidade de fornecimento e informaçõ...

Pacotecaixas

produtividadeother

transporteOcean,Land,Air

Lugar de origemCHINA

Apoio sobreother

Certificados ISO9001/CE/ROHS/CSA/UL

Código HS8543709990

portaDHL

Tipo de pagamentoT/T

IncotermEXW

Embalagem & Entrega
Unidades de venda:
Piece/Pieces
Tipo de pacote:
caixas
Exemplo de imagem:

APM techonogies programmable DC electr onic load 1200V 4400W can be switched quickly between different values in the same operating mode, including CC dynamic mode, CV dynamic mode, CR dynamic mode and CP dynamic mode, CC/CR high speed dynamic mode up to 50kHz. This function is suitable for transient test of power supply, test of battery protection characteristic and battery pulse charging etc. Dynamic mode test has continuous mode, pulse mode and toggle mode.

APM techonogies also have 200V DC Electronic Load and 600V DC Electronic Load for lower voltage options.Two or more loads can be connected in master-slave parallel mode to provide more power or current capacity to make Dc Electronic Load System with 200V DC Electronic Load System,600V DC Electronic Load System,1200V DC Electronic Load System.

Functions & Advantages:

Flippable Front Panel and Color Touch Screen
This series programmable DC electronic load is equipped with flippable front panel for 4U, 7U, 10U and 13U height models. Together with a large color touch screen provides simple and fast operation for customer. Real-time update of display input data, status and graphical display makes it more intuitive.


Multiple Operating Mode

This series programmable DC electronic load provides four kinds of basic operating mode including CV (constant voltage), CC (constant current), CR (constant resistance), CP (constant power), to satisfy a wide range of test requirements.


Adjustable CV Loop Speed
This series electronic load supports CV loop response speed setting to FAST, NORMAL or SLOW to satisfy different test requirements. This function may avoid the inaccurate measurement or testing fail caused by the response speed mismatch between the load and the power supply, which is possible to improve test efficiency and reduce costs on the equipments, time and expenses.


Carga dinâmica

This series electronic load can be switched quickly between different values in the same operating mode, including CC dynamic mode, CV dynamic mode, CR dynamic mode and CP dynamic mode, CC/CR high speed dynamic mode up to 50kHz. This function is suitable for transient test of power supply, test of battery protection characteristic and battery pulse charging etc. Dynamic mode test has continuous mode, pulse mode and toggle mode.


Sine Wave Dynamic Load
This series electronic load supports sine wave loading function which allows to load sine wave,can be used for impedance analysis test of fuel cells.


Dynamic Frequency Sweep Function

This series electronic load provides a unique constant current dynamic sweep to use frequency conversion to find out the UUT voltage of worst case.
This CC dynamic sweep allows the user to edit two load levels, start frequency, end frequency, step frequency, dwell etc.
The sampling rate is up to 500kHz, which make it can simulate different loading conditions for most test requirements.


Battery Discharge Test
This series electronic load has battery discharge function, and can perform discharge test under CC, CR or CP mode. The DC load can set end voltage or time to stop loading correctly and make sure the battery is not damaged due to over discharge. The user can set stop conditions, whenever met any condition, the load will stop loading and counting automatically. During the test, users can observe battery's voltage, discharging time and already-discharged-capacity.

Modo automático

This mode allows automatically switches among CV, CR, CC and CP modes. It is suitable for lithium ion battery charger testing to get a complete VI charging curve. This flexible auto mode also enormously improve test efficiency.


OCP/OPP Tests

This series electronic load provides OCP and OPP modes are mainly applied in over-current and over-power points tests. After the testing the load can automatically judge the test result according to the set specifications. Take OPP testing as example, the OPP provides ramped up power for the load to test the UUT voltage whether has reached trigger voltage level and to judge if the protection is acting normally or not.


List Mode

The list function allows user to create waveform files to automatically simulate various complicated loading conditions. The list mode has 10 files, by editing operating mode (including CC, CV, CR,CP, Short and ON/OFF), repeat times, total steps, setting value of each step and step time etc. This function can be applied to the testing of output characteristic and stability for power supply.


Master/Slave Control

This series electronic load provides the user with Master/slave mode, supports parallel connection under different power and same voltage and dynamically synchronized. In Master/slave mode, the user only need to control the master one, the load current will be automatically calculated and downloaded to the slave loads. The Master/slave mode greatly simplifies the operation when increased power is needed.


External Control and Current/Voltage Monitoring

This series electronic load has analog control interface to control the input voltage and current. The external signal 0 to 10V controls the sinking condition from 0 to full scale. Using the external control mode can simulate arbitrary waveform which is ideal for industrial control requirement.
The 0 to 10V analog output signal of V-MON/I-MON terminals represent input to which the terminals belong from 0 to full range.
An external voltmeter or oscilloscope can be connected to display input voltage/current change.


Grupo de Produto : Carga Eletrônica DC > Carga eletrônica de 1200V DC

Visão Geral da Empresa
A APM Technologies (Dongguan) Co., Ltd. é uma empresa de alta tecnologia especializada em pesquisa e desenvolvimento (P&D), produção e distribuição do sistema inteligente marinho (MSS), inversor solar PV, fonte de alimentação programável , sistema de teste automatizado e automatizado Equipamento de fabricação. Nossa empresa possui sistemas completos em planejamento de produtos, pesquisa e desenvolvimento, experimento de laboratório, testes e controle de qualidade. Além disso, passamos pelas certificações padrão ISO 9001. A equipe de P&D da APM Technologies consiste em mais de 100 pessoal que abrange o Ph.D. e titulares de mestrado, bem como especialistas seniores nas indústrias relacionadas. Ao colaborar com várias equipes de pesquisa nacional e internacional e manter uma cooperação estratégica de longo prazo com as principais faculdades e universidades, nossa empresa pode garantir que produtos e serviços liderem o setor. Ao aplicar nossas técnicas e tecnologias profissionais para inovar e romper continuamente, até agora a APM Technologies se inscreveu em várias patentes de invenção e já obteve uma série de patentes de utilidade, patentes de design, direitos autorais de software e outras patentes relacionadas. Nossos produtos foram aprovados nas certificações CE, VDE, SAA, CQC, CSA, FCC, etc. As tecnologias da APM desde o início até o presente e do passado para o futuro sempre sustentam o espírito da empresa de "busca constante de excelência", a fim de fornecer aos nossos clientes as "24 horas por dia de serviços contínuos".
Fotos da empresa
Certificação de produção
Baixar
Página inicial > Lista de Produto > Carga Eletrônica DC > Carga eletrônica de 1200V DC > Carga eletrônica DC programável de 1200V 4400W
Enviar e-mail para este fornecedor
  • *Assunto:
  • *Para:
    Ms. Emily Cui
  • *E-mail:
  • *mensagem:
    Sua mensagem deve estar entre 20-8000 caracteres
Enviar Inquérito
*
*

Casa

Product

Phone

Sobre nós

Inquérito

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

enviar